P14
The following steps can be set according to personal preference.
S-1
Hand Controller Instruction
CAUTION
Please RESET the desk at first time.
Please ensure that no objects (walls) will interrupt the movement
of the desk, and all cables of relevant devices are sufficiently long.
UP
Digital Display
DOWN
Memory heights
Memory/Setting
S-
Press
Long Press 5s
Long Press
Memory Height
Press the“m” key until it displays “ S - ”;
press one of the memory keys(number keys) and the current height
will be recorded.
RESET
: Long press the down key until the desktop reaches the
lowest position; long press the down key again, when it
shows”RST ”on the digital display, the desk is in initialization
mode. Release the down key when the buzzer rings, the
initialization succeeds.
PS. If the system is abnormal or the digital display
shows”RST ”, the desk needs to be initialized as written above.
Switch between Centimeter and Inch
Long press the“m” key for 5 seconds until it displays “S-1”and “1”flashes.
Press the“m”key again to set:
0 = cm
1 = inches
Exit to operation interface by pressing the“m”key after setting.