INSTRUCTION MANUAL FOR DISHWASHERS
UK
6.1
Settings
The following settings should only be configured by a qualified technician.
During installation or afterwards, a number of functions can be set in the dishwasher:
•
Press
buttons
3
and
4
together for a few seconds, with the machine off and the door open;
PASSWORD 00 will appear on the display.
•
Press
button
3
or
4
repeatedly until number “
12
” appears on the display.
•
Press
button
1
to enter the menu, then use
1
again to scroll through the items.
•
Activate, deactivate or adjust the function using buttons
3
or
4
.
“
Language
”: Choosing the display language.
“
Termostop
”: Enables termostop. This function guarantees the ideal rinse temperature.
“
Energy Saving
”: Enables Energy saving. This function allows energy-savings to be made when
the appliance is switched on but not in use.
“
Pre-heating
”: Enables or disables the Preheating function (fast loading).
“
Detergent pump
”: Enables the detergent pump.
“
Rinse aid pump
”: Enables the rinse aid pump.
“
Dosage Detergent g/l
”: Sets the concentration of detergent, grams/litre.
“
Dosage Rinse aid ajustment g/l
”: Sets the concentration of rinse aid, grams/litre.
“
Drain pump
”: Enables the electric drain pump.
“
Water hardness
”: Sets the water hardness according to
the following table (Only for versions with incorporated water softener):
Measured
hardness
Water hardness
DF DH
n°
0
÷
20
0
÷
11
1
21
÷
30
12
÷
16
2
31
÷
40
17
÷
22
3
41
÷
60
23
÷
33
4
61
÷
70
34
÷
42
5
“
Cycle for regeneration alarm with external softener
”: Sets the number of regeneration cycles
for an external water softener.
“Cycle counter
”: Resets cycle counter.
•
To exit the menu and save the settings, press button
1
for a few seconds
Page 12 of 14
