INSTRUCTION MANUAL FOR DISHWASHERS
Page 9 of 14
4.8
Displaying information
•
If you press
SELECT PROGRAMMES
(
2
) for a few seconds you will access the information menu.
•
Press
SELECT PROGRAMMES
(
2
) repeatedly to view, in sequence:
Tub temperature, boiler temperature, total number of machine cycles, any alarms.
To exit the menu press
SELECT PROGRAMME
(
2
) for a few seconds.
4.9
Turning the dishwasher off
Press
ON/OFF (1)
on the
DISPLAY (4)
to view the dishwasher symbol in stand-by.
4.10
Removing the integral filter
•
Move the washing and rinsing arms at right angles to the edge of the door (
Fig.7
).
•
Lift each semi-filter by the relative handle.
4.11
Emptying the dishwasher
•
With the machine on press
SELECT PROGRAMMES
(
2
)
to select the programme
Drain
.
•
Press
START
(3), to start the drain and self-clean programme.
•
Once the tub has drained, the stand by symbol will appear on the display.
4.12
Resin regeneration (*optional)
In machines with an incorporated water softener the “
REGENERATION SYSTEM ON
”
symbol indicates that the machine is running a resin regeneration cycle and that the current
wash programme could be longer.
N.B. Do not switch off the machine if a regeneration cycle is underway
In machines fitted with water softener, when the warning
‘NO SALT’
appears you should add salt to the
relative container; proceed as follows:
•
Remove the basket from the machine.
•
Remove the integral filter (
Fig. 7
).
•
Unscrew the cap on the salt container (
Fig. 8
).
•
Pour approx. 700g of regeneration salt (1or 2mm grain size kitchen salt with no additives) into
the container using the funnel supplied.
•
Close the container firmly.
•
After a few minutes the
‘NO SALT’
warning will disappear.
Содержание Evolution 2035WS
Страница 2: ......
Страница 3: ......
Страница 17: ...INSTRUCTION MANUAL FOR DISHWASHERS Page 14 of 14 UK ...