Maico touchTymp MI 26, Руководство по эксплуатации

Страница: 25 / 98

Operation Manual touchTymp MI 26 and MI 36 Version
8511780 Rev. 4 24 30/06/2021
4.2 Hardware Orientation
4.2.1 Display
Figure 15
The display on the touchTymp is a touch screen (Figure 15).
This design feature allows use while wearing latex gloves. A
rubber-tipped stylus can also be used to select the desired
function on the screen.
4.2.2 Connections for Accessories, Power Supply and USB-Devices
Figure 16 shows the connections on the backside of the device. The connections are
explained in Table 3.
Insert plugs with care into the appropriate connection. Do not
wiggle the plug or pull with force while connected. Disconnect
plugs cautiously. Consider instructions for Changing the Probe
System given in this section.
Figure 16
Table 3 Connections on Backside of Device
CONNECTIONS
1 Ethernet /
USB out Dual connector: Ethernet
– no function in actual touchTymp
version / USB A-connection for connection of USB flash drive
2 USB out USB A-connection for connection of USB flash drive
3 USB in USB B-connection for data transfer to PC
4
24 V/2,5 A
Power socket for power supply
UES65-240250SPA3
5 Response Connection for the Patient Response Switch
6 Phone L Connection for Headphones Left
7 Phone R Connection for Headphones Right
8 Bone Connection for Bone Conductor
9 Contra Connection of Contralateral headphone
10 TLK BK
Connection for Talk Back Microphone
11 Monitor
Connection for Monitor Headset
12 TLK FW
Connection for Talk Forward Microphone
13 Probe Connection for probe
See section 6.3 for more information on the pin assignment.
CAUTION
1 2 3 4 5 6 7 8 9 10 11 12
13