Your Circuit Maze Kit Includes
Assembling Your Circuit Maze
Step 1:
Fit the buzzer in the
round hole in the base.
Step 2:
Fit the bottom of the
wire spiral into the
square hole in the
middle of the base.
Step 3:
Remove the plastic
wrap from the battery,
and slip the clip's loop
over the po)
battery end.
Step 4:
Put the battery into the
battery holder. Attach
the clip to the bottom
of the wire spiral.
Step 5:
Connect the battery
wire to one buzzer wire.
Step 6:
Connect the other
buzzer wire to the
looped wand.
Make the connection!
Step 1
Step 3
Step 4
Step 5
Step 6
Electrical plugs always have
two prongs so electricity can
flow in and out.
Step 2
1 Clip
1 Base
1 Buzzer
1 Wire Spiral
1 Battery (AA)
(1.5 Volts)
1 Looped Wand
