Mahlkonig X54, Оригинальное руководство пользователя

Страница: 32 / 60

Home Grinder X54
32
Operation
Operating steps at a glance
The basic operating steps for using the
grinder are shown in brief in this Chapter.
Detailed descriptions of the individual
points can be found in the corresponding
sub-chapters.
1. Switch on the grinder
[see „Switching on the grinder“]
.
2. Select the collecting receptacle (24) / (25) and insert
the matching module (18) / (21)
[see „Selecting the
collecting receptacle (portafilter vs. container)“] / [see „Using the
portafilter module“] / [see „Using the container module“]
.
Important: If you are using the portafilter module
and want to change settings, do not insert the porta-
filter yet. You start the grinding process by inserting
the portafilter.
3. Select the desired recipe or the Manual Grinding
mode
[see „Selecting Recipe / Manual Grinding“]
.
If the recipe or manual grinding has already been set
as desired, skip this step and continue with Step 4 .
4. Set the grinding degree
[see „Adjusting the grinding degree“]
.
If the grinding degree has already been set as desired,
skip this step and continue with Step 5 .
5. Insert the collecting receptacle and start the grinding
process
[see „Starting grinding“]
.