Mahlkonig PROM, Руководство по эксплуатации

Страница: 8 / 16

H O R E C A G R I N D E R
US
8
START GRINDING
Requirements:
The hopper is fi lled with whole coffee beans and
the grind time and fi neness are set.
1. Switch on the coffee grinder with the mains
switch (pos. 4) (rear side of the grinder).The
indicator lamp (pos. 7) lights up.
2. Place the port-a-fi lter of your espresso
machine in the port-a-fi lter holder. Grinding
begins automatically.
GRINDING LARGE QUANTITIES
1. If you want to grind larger amounts of
coffee, use the grounds bin located in the
hopper to catch the ground coffee.
2. Remove the port-a-fi lter holder as shown
on page 18.
3. Set the desired grinding time with the
button (pos. 6).
4. Insert the grounds bin far enough under
the spout to push the start/stop button
(pos. 6) to trigger the grinding operation.
SPECIAL FUNCTIONS
DOUBLE GRINDING TIME / DOUBLE SHOT
Your coffee grinder is equipped with an
automatic function for grinding coffee e.g. for a
double espresso in one step
1. Briefl y press the port-a-fi lter once against
the start/stop button (pos. 5) . The indicator
lamp (pos. 7) blinks, showing that the
double shot function is switched on.
2. Now push the port-a-fi lter into the port-a-
fi lter holder. Grinding of a double quantity
begins automatically. This function can also
be used for fi lter and French Press grinding.
Switching Off The Function
• After grinding, the function is automatically
switched off again.
OR:
• Briefl y press the start/stop button again.
The indicator lamp stops blinking.
BREAK-FUNCTION
With the break function you can interrupt the
grinding process (for instance to press down the
espresso powder partway through).
1. Remove the port-a-fi lter holder / grounds
bin during grinding. Grinding stops and the
indicator lamp blinks.
2. To continue grinding push the port-a-fi lter
back into the port-a-fi lter holder or place
the grounds bin under the spout again.
If you do not wish to continue grinding after break,
tap quickly on the start/stop button (pos. 5).
SAFETY DEVICES
Your coffee grinder is equipped with a variety of
safety devices which protect the user and the
grinder from harm.
Microswitch in the hopper mounting
This microswitch makes sure that the grinder
does not start without a properly attached
hopper.
Fuse
As a protection against external power surges
the grinder is fi tted with a fuse. The fuse is
accessible from the footplate.
Protection through software
This safety device ensures that in the case of
overload, blockage or running empty the grinder
automatically switches off.
Grind chamber protection
There can still be tiny stones and grit even in
the most select coffee varieties. For such foreign
objects not causing any damage, the grinder is
fi tted with a safety device that stops the grinder
in such cases.