Mahlkonig K30 2.0, Инструкция по эксплуатации, Страница: 10 / 40

10
SINGLE ESPRESSO GRINDER
Safety
Intended use
The grinder is only suitable for grinding whole roasted espresso beans. Do
not use the grinder to grind other products or objects. It is intended for
commercial use and may only be serviced by trained personnel. It may,
however, be operated by other persons in a place where use is supervised.
Any other use is not considered to comply with intended use and can result
in material damage or even personal injury. Do not make any changes to the
grinder. The manufacturer or the supplier shall not be held liable for any injury
or damage resul ng from non-compliance with the safety instruc ons.
Safety informa Ɵ on
WARNING!
Danger of electrocu Ɵ on!
Improper use, incorrect electrical installa on or a voltage that is too
high can all lead to electrocu on.
– Connect the grinder only if the mains voltage of the socket
complies with the informa on indicated on the nameplate.
– Only connect the grinder to a socket with good accessibility so
that you can disconnect it quickly from the power supply in the
event of any hazardous incident.
– Do not use the grinder if you no ce any visible damage or if the
power cable or plug is faulty.
– If the power cable for the grinder is damaged, it must be re-
placed by the manufacturer or by quali fi ed personnel in order
to avoid hazards.
– Connect the grinder only to a power supply with a 16 A-slow
back-up fuse or a 15 A load switch.
Have the 16 A-slow back-up fuse or 15 A load switch
fi ed by a
quali fi ed electrician if the power connec on at the site of instal-
la on of the grinder is not secured in this way.
– Install the grinder only in places where the handling of the
grinder can be supervised by trained personnel.