Mahlkonig EK43 S, Оригинальное руководство пользователя

Страница: 21 / 28

21
eK43 | eK43 S | en
Cleaning the burr assembly
• The manufacturer recommends using the grinder cleaner
grindZ
Tm
. For more information about GRINDZ
Tm
,
visit www.mahlkoenig.de .
• The burr assembly should be cleaned every 2–5 days.
1. Make sure that the sliding valve
(11)
encloses the bean container
(1)
in
the direction of the burr assembly.
2. Press the on switch I (3) to switch on the grinder.
3. Rotate the hand wheel (9) until the pointer displays the coarsest grind on
the grinding degree scale (10) (see chapter “Switching on the grinder and
adjusting the grind”).
4. Pour the grinder cleaner into the bean container. Pay attention to the
quantities indicated by the manufacturer of the grinder cleaner you are
using.
5. Place a collecting container underneath the outlet
(7)
to collect the
grinder cleaner.
6. Open the sliding valve to start grinding the grinder cleaner (see Fig. C
or
D
).
The grinding of the grinder cleaner is completed as soon as the grinder is
idling.
7. Close the bean container (1) by pushing in the sliding valve (11) .
8. Remove the residue from the outlet by tapping the knocker a few times.
9. Press the off switch 0 (4) to switch off the grinder.
10. Wipe the bean container with a dry, lint-free cloth.
11. Grind a volume of coffee beans equal to the volume of grinder cleaner
used in order to remove leftover cleaning particles. Set the grind to the
desired setting during the grinding process.
12. Dispose of the ground grinding cleaner and the ground coffee beans in
commercial/domestic waste.