Mahlkonig E80 GbW Скачать руководство пользователя страница 21

Страница: 21 / 47

Detecting the portafilters / filter baskets

•

Each portafilter/filter basket must be registered by means of

Portafilter Detection (PFD) in a so-called "learning process",

so that the grinder automatically detects different portafil-

ters/filter baskets.

•

You can save up to 6 portafilters/filter baskets with the grinder.

•

The portafilter/filter basket can be assigned to a recipe and

activated as soon as it has been registered.

Call the “Portafilter Management” submenu and proceed as described in

steps 2–4 in the chapter on "Activating Portafilter Detection".

To register the portafilter/filter basket, select the "Add Portafilter" menu

item by turning the controller

(3)

and confirming your selection by press-

ing the controller.

The prompt "Please insert portafilter" appears on the display

(14)

Push the portafilter/filter basket between the portafilter intake

(12)

and

the portafilter support/basket holder

(11)

and release the portafilter/

filter basket.

If the weight of the portafilter/filter basket appears on a green back-

ground on the display, the portafilter/filter basket has been successfully

registered and you automatically return to the submenu.
If the warning 'PF scan failed' appears on the display, turn the controller

to select the "Repeat" menu item and confirm your selection by pressing

the controller. The portafilter/filter basket is registered again.

Remove the portafilter/filter basket.

You can assign the registered portafilter/filter basket to a recipe.

To register additional portafilters/filter baskets, turn the controller to se-

lect the “Add Portafilter” menu item, confirm your selection by pressing

the controller and proceed as described in steps 2–4.

If you wish to overwrite a registered portafilter/filter basket, turn the

controller to select the desired portafilter number in the “Portafilter

Management” submenu and confirm your selection by pressing the

controller.

You are now in the portafilter number submenu and can register the

portafilter/filter basket.

Turn the controller to select the “Click to re-scan” menu item and con-

firm your selection by pressing the controller; proceed as described in

step 3–4.

E80 GbW | F80 GbW | EN

ESPRESSO GRINDER| FILTER COFFEE GRINDER

Содержание E80 GbW
















































Результаты поиска

Содержание E80 GbW

Отзывы:

Похожие инструкции для E80 GbW

Бренды по названию

Популярные бренды

Mahlkonig E80 GbW, Руководство по эксплуатации

Результаты поиска

Содержание E80 GbW

Отзывы:

Похожие инструкции для E80 GbW

Бренды по названию

Популярные бренды