S P E Z I A L M Ü H L E N | S P E C I A L G R I N D E R
7. Insert the fastening screw of the rotary knob and tighten it fi rmly
with a screwdriver.
Adjusting spindle
If the result is not good enough the grinder then needs cleaning or you
have to change the grinding discs.
9. Cleaning the Grinder / Grater
Always pull the power supply plug out of the outlet
before carrying out any maintenance or cleaning
work on the device!
Observe the safety instructions under 1.2!
9.1 Cleaning with GRINDZ™ Grinder Cleaner
We recommend cleaning your shop grinder once a month with our
GRINDZ™ Grinder Cleaner.
Simply take the recommended dose of 70 - 80g for shop grinders and
drop it into the empty grinder hopper. You can also use the cup of the jar
for dosing. A full cup will yield between 35 - 40 grams.
Adjust machine setting to medium and operate as if grinding coffee
beans. Once complete, we recommend passing twice as much coffee
through to purge any residue.
9.2 Cleaning the grinder casing
Clean the casing of your grinder every now and then with commercially
available mild cleaning agents. In addition, you should also clean the
magnet in the hopper from time to time by removing any foreign ob-
jects that may have become stuck because otherwise this could result
in clogging.
Do not let any foreign objects fall into the grinding
mechanism!!
9.3 Cleaning the grinding mechanism
1. Pull out the power supply plug !
2. Rotate the rotary knob (11) to „coarse“.
3. Unscrew the two screws (13) on the grinder casing cover (12) and
then remove this cover.
4. Take the carrier (10) out of the slot of the pre-breaker.
5. Pull the pre-breaker (9) off the motor shaft. Use a screw driver.
6. Clean the grinding mechanism with a fi ne brush and remove any
foreign objects.
11
