MAHLE AFC-9, Руководство по эксплуатации, Страница: 11 / 16

AFC-9/CFC-16
|
11
|
en
Troubleshooting
10. Troubleshooting
This section is a list of potential problems and
solutions. If the solution listed fails to correct the
problem, call the manufacturer at the numbers and
address printed on the back cover of this manual.
Please have the model number, and serial number of
your jack available. The serial number is permanently
stamped on a metal tag located
above the door or on
the shroud at the top .
Problem Cause/Solution
Ram does not actuate
•
Not connected to air supply. Connect unit
to adequate air supply (see Installation
instructions section of manual).
•
Setscrew on door is not properly actuating
the control valve. Adjust setscrew (see
Control
Valve Actuation Adjustment
section)
.
Inadequate crushing
action
•
Air pressure too low. 100 psi will
adequately crush most car and light truck
filters. Heavy truck filters require a
minimum of 120 psi.
•
Some brands or models of oil filters are
stronger than other brands and therefore
will not crush as flat.
•
Excess air leakage. Locate source of
leak(s) and repair.
•
Crushing too many filters at one time or
there is too big of height difference in the
filters you are crushing at one time. Crush
filters individually.
Oil is running over the
catch basin
•
Make sure vehicle is in neutral and baking
brake is disengaged. Always chock wheels
on opposite end prior to lifting.