Mahindra SCORPIO S3 Plus 2020, Руководство пользователя

Страница: 253 / 289

14-2
© Copyright Mahindra and Mahindra Ltd. 112020
Pressing the hazard switch twice deactivates this feature.
1 14 4..2 2 V Ve eh hiic clle e D Do oe ess N No ott S Stta arrtt -- C Ch he ec ckkss
Before making these checks, make sure you have followed the
correct starting procedure and that you have sufficient fuel.
IIff tth he e e en ng giin ne e iiss n no ott c crra an nkkiin ng g o orr iiss c crra an nkkiin ng g tto oo o ssllo ow wllyy/ / iin ntte errm miitttte en nttllyy
1.
Check that the battery terminals are tight and clean.
2.
If the battery terminals are firmly fastened, switch ON the
interior lamps.
3.
If the lamps do not illuminate, glow dim or go OFF when the
starter is cranked, then it indicates a weak or discharged
battery. Try jump starting. Follow ‘Jump starting’ instructions
given later in this chapter.
4.
Check the fuses in the Engine Compartment Fuse Box and
Central Fuse Box.
IIff tth he e e en ng giin ne e c crra an nkkss n no orrm ma allllyy,, b bu utt d do oe ess n no ott sstta arrtt
1.
If the lamp illumination is normal, engine is cranking normally,
but the engine does not start even after repeated cranking, it
needs adjustment or repair. Contact an Authorized Mahindra
Dealer.
2.
During winter, use non-winter diesel or due to extreme cold
conditions, the vehicle may not start. Contact an Authorized
Mahindra Dealer for further assistance.
To prevent damage to the starter, do not crank the engine
for more than 15 seconds at a time. Wait 10 to 15
seconds before trying again.
IIff tth he e e en ng giin ne e sstta allllss w wh hiille e d drriivviin ng g
Reduce your speed gradually, keeping a straight line. Move
cautiously off the road to a safe place. Turn ON your hazard warning
flashers and check for any malfunction lamps in the instrument
cluster. Turn the ignition OFF, wait for approximately 90 seconds
and try starting the engine again. If the vehicle still does not start
contact an Authorized Mahindra Dealer.
If the engine stalls while running, the power assist for the
brakes and steering will not work. Steering and braking will be
much harder than usual.
IIff tth he e e en ng giin ne e ssp pe ee ed d d do oe ess n no ott iin nc crre ea asse e
If the engine speed does not increase when the accelerator pedal is
depressed, there may be a problem in the Engine Management
System, electrical or electronic controls. In case of certain faults,
the engine may go to limp home mode, which is indicated by the
check engine lamp. Have your vehicle checked by an Authorized
Mahindra Dealer as soon as possible.
E EM ME ER RG GE EN NC CIIE ES S