Mahindra MARAZZO M2 2020, Руководство пользователя, Страница: 269 / 288

© Copyright Mahindra and Mahindra Ltd. 012020
18-9
• Oil is also used to lubricate the stems of intake valves. Some of
this oil is sucked into the combustion chamber together with the
intake air and is burnt there
• Engine oil consumption depends on the operating conditions in
which the vehicle is driven. Oil consumption will be more due to
high speed driving and frequent acceleration and deceleration. A
new engine may consume more oil since its pistons, piston rings
and cylinder walls are not conditioned
1 18 8..5 5..4 4 C Ch he ec ckkiin ng g/ /T To op pp piin ng g tth he e E En ng giin ne e O Oiill
• Make sure the vehicle is on level ground
• Turn the engine OFF and wait a few minutes for the oil to settle
down into the oil sump
• Apply the parking brake
• Open the hood, use stay rod to support the hood. Protect
yourself from engine heat
• Locate and carefully remove the engine oil level dipstick
• Wipe the dipstick with a clean cloth. Insert the dipstick fully, then
remove it again
• If the oil level is between “
M Miin n
” and “
M Ma axx
” marks, the oil level is
acceptable.
D DO O N NO OT T A AD DD D O OIIL L
• If the oil level is below or near the “Min” mark, add enough oil
through the oil filler cap to raise the level within the “Min” and
“Max” marks. Wait for few minutes after every top-up for the oil
to settle down before checking the level
• Oil levels above the “Max” mark may cause engine damage/poor
performance
• Put the dipstick and the oil filler cap back and ensure it is fully/
properly seated
M MA AIIN NT TE EN NA AN NC CE E