Mahindra DISC PLOUGH, Руководство оператора

Страница: 21 / 52

Disc Plough
Rockshaft Tractor wheel Size of disc or Width of cut Dimension ’X’
setting Plough bottom required as shown on Illus
660.4 mm discs or
Category 2 1219.2 mm Inside Tyres 304.8 mm plough 304.8 mm 152.4 mm
bottom
660.4 mm discs or
Category 1 1016 mm inside Tyers 304.8 mm plough 304.8 mm 203.2 mm
bottom
Figure 7
SETTING UP INSTRUCTIONS
15
ROCKSHAFT
1. Set Rockshaft clamps with ends in vertical position and
right hand end down.
2. Position Rockshaft sideways according to width of cut
required. As a guide to assist in correctly locating the
Rockshaft the following examples are provided.