Mahindra BRCXTV44, Руководство пользователя

Страница: 14 / 49

11
STEP 4
CONTROL BOX INSTALLATION
1) Remove control box (item 1) from guard (item 2)
by loosening the knob (item 3).
TIP: Replace the knob on guard and tighten securely
to avoid loss of knob due to vibration while in use.
2) Install the o
-
ring (item 1) on the box support (item
2) using hex. bolt 5/16" n.c. x 3/4" (item 3), flat
washer 3/8" hole (item 4) and nylon insert lock nut
5/16" n.c. (item 5).
Do not over tighten o
-
ring.
Use the slot (item A) on the control box to avoid over
tightening and to make sure it is well inserted.
3 ) Choose between the two ways of installing the
control box support (item 1).
NOTE: In order to prevent damage due to water
accumulation, make sure to place the control box
horizontally.
Option A
Use two hex bolts 1/4" x 1 1/2" ( item 2), two spacers
(item 3) and two flange nuts 1/4" (item 4) to attach the
control box support to the support brackets (item 5).
NOTE: Choose the right hole combination on the
control box support in order to orient the front of the
control box towards the driving controls of the vehicle.
(see operation section to see how control box is
oriented), Furthermore, make sure to have free
access at all times to the equipment's controls in
order to safely control the equipment.
Option B
Drill two holes of 1 9/16’’ apart on the vehicle. Secure
the control box support with two bolts 1/4" x 1/2" (item
6) and two flange nuts 1/4".
Insert the control box in the control box support.
ASSEMBLY