Mahindra BOLERO NEO N10 2021, Руководство пользователя

Страница: 256 / 289

© Copyright Mahindra and Mahindra Ltd. 112020
14-5
cables and terminals. Use a stiff wire brush to remove all
corrosion. Reconnect the cables to the battery terminals
and jump the vehicle.
2.
Untangle and unwind your jumper cables. Like your batteries,
your jumper cables will probably have red and black cables and
will have heavy duty clamps to connect to the battery
terminals. You must make sure that the red and black ends of
your jumper cables never touch each other once they are
connected to the batteries; permitting them to do so can
result in serious arcing and/or damage to vehicle
3.
Connect the jumper cables in the order described below;
• Connect one red clamp of the jumper cable to the positive
(+) terminal of the discharged battery
• Connect other end of the red clamp to the positive (+)
terminal of the booster battery
• Connect one black clamp of the jumper cable to the
negative (-) terminal of the booster battery
• Connect the other end of the black clamp to the negative (-)
terminal of the discharged battery
• Crank the engine for starting
• Once the vehicle gets started, carefully remove the jumper
cables in the reverse order of attachment
Make sure none of the cables are dangling into the engine
compartment, where they could be exposed to moving
parts.
4.
Remove the jumper cables once the vehicle starts. Do this in
the reverse of the order in which they were attached, and don't
let any of the cables or clamps touch each other (or dangle
into the engine compartment)
• Disconnect the black clamp of the jumper cable from the
negative (-) terminal of the discharged battery
• Disconnect the other end of the black clamp from the
negative (-) terminal of the booster battery
• Disconnect the red clamp of the jumper cable from the
positive (+) terminal of the booster battery
S22L31
Booster
Battery
Discharged
Battery
Positive (Red)
Negative (Black)
E EM ME ER RG GE EN NC CIIE ES S