Mahindra BOLERO NEO N10 2021, Руководство пользователя

Страница: 211 / 289

11-14
© Copyright Mahindra and Mahindra Ltd. 112020
The rear windshield glass defogger button is located in the switch
bank on the instrument panel RHS of steering, adjacent to the fuel
lid button. Press the button once to activate the defogger. The LED
on the button illuminates upon activation and the defogger heats
the rear windshield clearing the fog. Switch OFF the defogger by
pressing the button again as soon as the fog is cleared. The rear
windshield defogger switches OFF automatically after a pre-defined
time, based on ambient temperature.
1 11 1..1 15 5..3 3 H HV VA AC C P Po oiin nttss tto o R Re em me em mb be err
• For quickly clearing the misted/fogged/frosted-up windshield,
set the blower speed to maximum. For quick defrosting, set the
temperature to extreme hot
• Once the windshield is cleared, keeping the air conditioner ON
leads to dehumidified cabin heating/cooling which helps in
keeping windshields and windows clear. Keep the fresh air mode
selected. If required, re-adjust the blower speed and
temperature control knob to maintain comfort. The temperature
of air coming out of the vents should neither be too hot nor too
cold
• Driving the vehicle for long with the air conditioner switched off
may lead to windshield or windows getting misted/fogged up
• Driving the vehicle for long continuously in the recirculation mode
may lead to windshield or windows getting misted/fogged up
• Do not blow cold air on the windshield and windows for long
during humid weather. It could make windshield/windows mist/
fog-up
• When on a long drive during warm humid/rainy weather, once
cabin temperature becomes comfortable, shift to ‘AC LO’ mode,
if using ‘AC HI’ mode earlier. Adjust the temperature knob such
that air coming out of the vents is not too cold. Keep the fresh
air intake mode selected. Shift to any distribution mode other
than defrost mode. This will help in keeping windshields and
windows clear
• For defogging/de-misting/defrosting the side windows at the
front, select either Face or Face-Foot mode while directing air
flow towards windows by adjusting the louvers of side vents. All
other settings should be kept same as advised for windshield
defogging/de-misting/defrosting
• For heating the vehicle interior while windshield defogging/de-
misting/defrosting, select the Foot-Defrost mode. All other
W12K31
H HE EA AT TIIN NG G,, V VE EN NT TIIL LA AT TIIO ON N A AN ND D A AIIR R--C CO ON ND DIIT TIIO ON NIIN NG G S SY YS ST TE EM M ((H HV VA AC C))