16 Series, Model - 2816 4WD
T
ighten the jam nut on the lock
bolts to a torque of 33 to 40 lb.ft
(44 to 54 N.m).
Install the position pins.
While holding the ROPS bar
,
CAREFULL
Y
remove the position
pins.
Install the lock pins.
CAREFULL
Y
move the ROPS
bar t
o the desired position.
Install lock nuts and tighten to a
torque of 33 to 40 lb ft (44 to 54
Nm).
NOTE:
The lock nuts can be
omitted for operator conven-
ience, if the ROPS is folded fre-
quently
.
When the low clearance tractor operation is completed, return the ROPS
to the secu
red upright position.
STEP 9
STEP 7
STEP 10
LOW CLEARANCE
POSITIONS
POSITION PIN
JAM NUT
LOCK BOL
T
STEP 5
LOCK PIN
LOW CLEARANCE
POSITIONS
STEP 6
ROPS BAR
POSITION PIN
ROPS BAR
TO
THE LOW POSITION
LOCK NUT
LOCK PIN
STEP 8
14
SAFETY/DECALS_______________________________________________________
