MAHA ZS SQUARE II 3.5, Оригинальная инструкция по эксплуатации

Страница: 27 / 52

BA322301-en
27
Function Short form Comments
K
Lighting
– switches on above the
pinch protection, off below
= LED on
– is always off = LED off
--- ---
4.3.2 Checking the Support and the Lifting Process
1 Set the main switch to position I and wait until the control unit is ready for
operation.
2 Press the UP button until the supports are in contact with the support points
of the vehicle.
3 Check the position of the supports and correct it if necessary.
For swing arm supports: Check that support arms lock securely. If
necessary, move the support arms slightly until the toothed segments are
engaged.
CAUTION
The support arm lock must not be operated under load.
4 Continue the lifting process pressing the UP key to the desired lifting height.
4.3.3 Lowering Process and CE Stop
1 Before lowering the vehicle, remove tools, support blocks or similar
obstacles from under the vehicle. The operator is responsible for ensuring
that nobody is within the danger area.
2 Press and hold the DOWN button until the desired lifting height is reached.
3 The lowering process stops automatically when the button is released, the
CE stop height is reached or the lift has been fully lowered.
4 For complete lowering to the home position, release the DOWN button and
press it again. When lowering below the CE stop height, an additional
acoustic signal sounds.