MAHA LPS 3000 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 115

MAHA LPS 3000 Скачать руководство пользователя страница 82

82

BA052301-en

9.3

Engine Flexibility Test

The engine flexibility can be checked using this menu point. Once the flexibility test has been
called up the vehicle mass and Road Load must be entered as in the driving simulation test.
Enter the start and finish speed of the test. Confirm using the <



> or <Return> key and then the

test can begin.

1 Position the vehicle on the dyno and fix it.

2 Call up the menu FLEXIBILITY

MEASUREMENT.

→

Following screen appears:

3 Enter the parameter in the boxes using the

digit keys or
if available, load these from the database
with the <F6 DATABASE> key.

4 Use the button<F8 CONTINUE>.

Use the cursor keys <



> and <



> to change between the values. Delete erroneously entered

characters using the <BACKSPACE> key. Delete a complete box with the <DELETE> key.

5 Drive in desired gear and before the start

speed is reached, apply full throttle.
The test stand starts recording the time.

6 The duration of the measurement and the

measurement value are displayed.

«
...
80
81
82
83
84
...
»

Содержание LPS 3000




















































































































Отзывы:

Нет отзывов