Magus 21Series, Руководство пользователя

Страница: 28 / 78

Page 28/78
Stepfour: Selectthe file in “channel”
Stepfive: Press “condition backup”
4.7 Alarm imput/output setting
Menu：main menu----system setting---alarm setting
Alarm Input: input serial number, 1,2,3, ... 16 digits on device backplane
Device Type: refers to the conditon of alarm output port, normally are turn on or turn off . the normal state is turn on, set as NC
Video channels: an alarm port can trigger one or more channels for simultaneous recording, according to the requirement to click the
corresponding box. .
Video Delay: delay recording time after alarm status cancelled, according to the requirement can select maximum 60 seconds.
Output Delay: , the alarm continues to output after alarm cancelled.
Visits screen: Full screen monitor when the alarm happened,and switch according to the order.
PTZ linkage: an alarm occurs, the head quickly point to the desired location or by pre-route inspection. PTZ must be setted before
linkage.
Screen promote: when alarm, the screen pormote with words