Hose routing
MAGURA MT brakes offer you perfect hose routing options.
Loosen the banjo bolt with a Torx T25 key by turning max.
30°
counter clockwise. Turning beyond
30° may introduce air into the system.
Now turn and adjust the hose to the required angle.
Attention:
always hold the screw in position with the T25 key to avoid further opening!
No bleeding necessary if you follow this advice!
Check the brake
After shortening the hose and adjusting hose routing check the brake for leaks and control the
function by pulling on the lever blade.
If the result is not satisfactory please follow the instructions for brake bleeding.
