Maguire Products Vacuum Batch Dryer VBD-150, Установка, эксплуатация и обслуживание

Страница: 15 / 98

Maguire Products, Inc.
15
VBD

- Vacuum Dryer

TSC
Install Connections
Attach the Heating Hopper Slide Gate air
lines.
The two air lines that connect the Heating Hopper Air
cylinder to the VBD-150 are different sizes to prevent
an incorrect connection.
Attach the Heating Hopper Hose
Using the 2" hose clamp, attached the red heating
hose to the Heating Hopper.
Attach the RTD Plugs
The RTD plugs are different sizes and will only install on the correct outlet.
Installing the Retention Hopper
Unbox the Retention Hopper. The Retention Hopper is identified by the
red handles located on the top of the hopper (the Vacuum Chamber has
red handles on the upper sides).
Close the slide-gate to allow the Retention Hopper to seat down onto
the base of the VBD-150. Once seated open the slide-gate to allow
material to flow.
Install the Retention Hopper so that the Retention Hopper manual slide-
gate is located at the forward right corner of the Dryer.