Maguire Products FLEXBUS, Инструкция по эксплуатации

Страница: 17 / 29

M A G U I R E P R O D U C T S , I N C .
17
M A G U I R E

FLEXBUS™
Flexbus System Setup Options
The Setup screen also allows for setting: Date and time, screensaver timeout,
screen brightness, screen calibration, updating Flexbus controller and
receiver/pump firmware, changing the password, language selection and date
format. To enter Setup press the Setup button on the home screen. Default
password is 22222.
Set Date and Time
Press the field you would like to edit. Enter the current Date or Time by
first pressing to select the field. Press CE to clear the current date or time.
Then enter the Date or Time as it would be displayed left to right. Press
the green check
when complete.
Set Screensaver Timeout, Set Screen Brightness, Calibrate Screen
Screen Saver is the elapsed time in minutes until an inactive (untouched)
display will blank the screen and show the screen saver. Setting the
screen saver to 00 will disable the screen saver. The Brightness slider
allows the brightness of the screen to be adjusted. Calibrate set the
calibration of the touch screen's X-Y coordinates. To complete, follow the
prompts. Press the green check
when complete.
Update Flexbus Touchscreen Firmware
Requires a firmware update provided by Maguire Products Inc. Copy
firmware to USB and insert USB into the controllers USB port. Press this
Update button. Press the green check
to start the update. The
firmware update will be copied from the drive to the controller. When the
copy has completed, you will be prompted to turn toggle power (off/on).
Update will be verified and applied on reboot of the controller.
Update Receiver and Pump Firmware
Requires a firmware update provided by Maguire Products Inc. Copy
firmware (.XUF file) to USB and insert USB into the controllers USB port.
Press this Update button. Press the green check
to start the update.
The firmware update will be copied from the flash drive to the Pumps and
Receivers that require the update (up-to-date firmware will not be
changed). When the copy has completed, you will be prompted to turn
toggle power (off/on). Updates to devices are logged in the Alarm/Event
log.
Change Passwords
Set the Operator password and the Administrator password.
Operator Password - When enabled, all Pump and Receiver
parameter fields are password protected.
Administrator Password - Changes the Administrator
password.