Maguire Products FLEXBUS, Инструкция по эксплуатации

Страница: 16 / 29

M A G U I R E P R O D U C T S , I N C .
16
M A G U I R E

FLEXBUS™
Removing Receivers or Pumps from the configuration
If a pump or receiver needs to be removed from the configuration, it can be removed using this
procedure.
On the HOME
screen PRESS: Pressing the SETUP button prompts for a
password.
PRESS:
22222
Enter the password (default password is 22222)
Press
to confirm password.
This enters the Setup screen. This screen contains several setup specific options.
PRESS:
or
Press the large Receiver or Pump button
depending on which device you want to remove.
The screen will contain any previously assigned devices (Pumps or Receivers).
A device must be turned off or communication must be disconnected to remove the
device.
When a device is turned off or communication to the device is disconnected, the loader
or pump icon will show a red X over it. The red X enables the option for the device to be
removed by pressing the device.
PRESS: or
To remove the pump or loader that you want to
remove.
For Receivers, a prompt to remove the receiver will be shown. If a pump is being removed, a
prompt to remove all receivers from this pump will be shown.
PRESS:
To return to the Setup screen. When you return to
the Setup screen, the Receivers button will show
the Setup symbol on the pumps button indicating
that you are still in the Receiver Assignment mode.
PRESS: or
To Exit the Assignment Mode. Setup icon will
disappear indicating you are out of the assignment
mode.
PRESS: To exit the Setup screen.