Magtrol TM Series, Руководство пользователя, Страница: 5 / 44

TABLE OF CONTENT
SAFETY PRECAUTIONS C
TABLE OF CONTENT V
PREFACE VII
1. INTRODUCTION 1
1.1 GENERAL INFORMATION 1
1.2 TM TRANSDUCER RANGE PRESENTATION 1
1.3 DATASHEET 2
2. INSTALLATION / CONFIGURATION 13
2.1 MOUNTING POSSIBILITIES 13
2.1.1 Suspended Installation 13
2.1.2 Supported Installation 14
2.1.3 TM / TMB in Vertical Installation 14
2.2 PARASITIC FORCES 15
2.2.1 Radial Forces (Bending) 15
2.2.2 Axial Forces (Thrust) 16
2.3 MEASURING SHAFT VIBRATIONS 17
2.3.1 Permitted Vibrations on Measuring Shaft 17
2.3.2 Torque Signal Conditioning Electronic Circuit 19
2.4 MOUNTING LIMITS 20
2.4.1 Dynamic Torque 20
2.4.2 Natural Frequency of Drive Train 20
2.4.3 Natural Measuring Shaft Torsional Frequency 22
2.4.4 Maximum Dynamic Amplitude 22
2.5 PROTECTIVE SYSTEMS 23
2.6 ELECTRONIC SIGNAL PROCESSING 24
2.6.1 MODEL 3411 - Torque Display 24
2.6.2 DSP 7000 - High-speed Programmable Dynamometer Controller 25
2.7 ELECTRICAL CONNECTIONS 26
2.7.1 Grounding 26
2.7.2 Connecting Cable 27
2.7.3 Cable Assembly ER107 (Pigtail Wires) 27
2.7.4 Cable Assembly ER113 (14-pin Connector) 27
2.7.5 Connection to Non-Magtrol Electronics 28
V
TM
series
TABLE OF CONTENT