Magtrol TM Series, Руководство пользователя, Страница: 42 / 44

4.2 REPAIR
In case of a defect, please see chapter
see chapter SERVICES INFORMATION
of this manual. Whether you are
directed to ship your equipment back to MAGTROL INC. in the United States or MAGTROL S.A. in Switzer-
land, it is very important to include the following information with your return shipment:
1. Model number, part number, serial number, order number and date of acquisition
2. Description of the defect and the conditions in which it appeared
3. Description of the test bench (drawing, photographs, sketches, etc.)
4. Description of the tested object (drawing, photographs, sketches, etc.)
5. Description of the test cycle
MAINTENANCE MUST BE PERFORMED BY MAGTROL IN ORDER TO GUARANTEE FUTURE
MEASURING ACCURACY.
To allow MAGTROL to complete the work in the best possible time, carefully pack the torque transducer
and follow the procedure outlined
see chapter SERVICES INFORMATION
of this manual.
4.3 CALIBRATION
To ensure correct operation of the sensor and long-term measurement consistency, it is recommended
to calibrate the sensor regularly. Magtrol recommends a factory calibration (e.g. in Magtrol’s ISO 17025
accredited laboratory)
every 12 months
.
Returning the sensor directly to the Magtrol factory is both advantageous and economical. We can guar-
antee a dedicated calibration for the sensor performed by one of our specialists. In addition, any wear and
tear requiring maintenance will be immediately taken care of by our after-sales service team.
4.4 PACKAGING
The TM 301 to TM 308 are delivered with specific packaging designed to store the sensor while not in use
as well as to return the sensor to Magtrol for annual calibration.
For this one, please keep the packaging !
CAUTION
34
TM
series
MAINTENANCE, REPAIR & CALIBRATION