
22
Magtrol Hysteresis Dynamometers
Chapter 3 – Installation/Configuration
SETUP
3.3.2
PC-B
aSeD
T
eST
S
ySTeMS
In a PC-based motor test system, data is collected on a personal computer using Magtrol’s M-TEST
Software, a DSP7000 Programmable Dynamometer Controller and requisite interface cards and
cables.
Note:
Magtrol’s Single or Three-Phase Power Analyzer can be integrated
into this system as well as Magtrol’s Temperature Testing hardware
and Software.
The following diagrams illustrate the required cable sets and connections for a PC-based test system
setup.
1
o----------
o----
o----------
HD / ED
DYNAMOMETER
PC
USB
M-TEST
DSP7001 CONTROLLER
2 Pin Dynamometer Brake Cable
PN88M070-0150 (included with dynamometer)
14 Pin/14 Pin Instrument Cable
PN88M007-0150 (included with dynamometer)
Figure 3–7 Dynamometer with DSP7001 Controller and M-TEST Software
1
o----------
o----
o----------
HD / ED
DYNAMOMETER
PC
USB
M-TEST
DSP7001 CONTROLLER
2 Pin Dynamometer Brake Cable
PN88M070-0150 (included with dynamometer)
14 Pin/14 Pin Instrument Cable
PN88M007-0150 (included with dynamometer)
6510
e
POWER ANALYZER
AC/DC
Input Power
GPIB
Card
Figure 3–8 Dynamometer with 6510e Power Analyzer, DSP7001 Controller and M-TEST Software
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com