Magtrol 3410, Руководство пользователя, Страница: 21 / 34

12
Magtrol Model 3410 Torque Display Chapter 4 – Manually Controlled Operation
OPERA
TION
4.1.5 c
ontraSt
S
etup
The 3410 is shipped with the Contrast programmed to the lowest setting in order to prolong display
life. If it is necessary to increase the Contrast for improved readability, execute the following
steps:
1. Press and release SYSTEM button 5 times. The display appears as follows:
POWER TORQUE SPEED
Figure 4–7 Contrast Setup Menu
2. Press and release SELECT button until desired brightness is reached (select from a range
of 1 to 3).
3. Press and release SYSTEM button once. The Saving System Display will flash momentarily
and the unit will automatically return to the Main Menu.
4.1.6 S
ySteM
S
etup
c
heck
1. To check and make sure that all parameters have been set properly, press and hold SELECT
button.
Example: When testing a TM 314 (which has a 60-bit encoder), with power
units expressed in watts and torque units expressed in oz.ft, the
System Check Display will appear as follows:
POWER TORQUE SPEED
Figure 4–8 System Check Display Example
2. When the SELECT button has been released, the unit will automatically return to the Main
Menu.