Rev: 2.01
4
P\N: 99875451
Figure 4
5.
Connect the I380\ Fargo communications cable to the jp10 connector on the printer main
board, see figure 1.
6.
Apply silicone to the jp10 cable\connector to prevent disconnection of the cable, see
figure 1.
7.
Replace the plastic cable holder, see figure 3.
8.
Reinstall the Fargo Printer into the ExpressCard chassis (refer to the Printer Replacement
Procedure P\N: 99875404).
9.
Once reassembled, test the functionally of the ExpressCard 1000 by printing several
sample cards (refer to Printer Replacement Procedure). If the any errors occur contact the
help desk, if sample cards print properly the replacement is complete.
