3 - XY Transport Ribbon Cable Replacement Procedure
ExpressCard 2000| Instant Issuance Card Personalization System | XY Transport Ribbon Cable Replacement Procedure
Page 7
3
XY Transport Ribbon Cable Replacement Procedure
3.1
Prepare the Device
Prepare the device for service by following these steps:
1)
Offer the customer the opportunity to remove any proprietary or security-sensitive consumables from
the device, including card stock, image printer ribbons, indent cartridges, and tipper foils. Some
consumables contain negative imprints of cardholder data and must be handled securely.
2)
Make sure the device is powered on and connected to the network.
3)
Open the top access door.
4)
Inspect the device for any items that do not belong inside the cover, and remove them (examples
include loose mechanical parts, cards, insect or animal leavings, or jewelry).
5)
Power down the device.
6)
Disconnect the device’s power and network cables and any security hardware.
