DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Page 7 of 60 (
D998200129-10
)
CE STANDARDS
Testing for compliance with CE requirements was performed by an independent laboratory. The unit
under test was found compliant with standards established for Class B devices.
EU STATEMENT
Hereby, MagTek Inc. declares that the radio equipment types
Wideband Transmission System
(802.11
wireless) and
Non-Specific Short Range Device
(contactless) are in compliance with
Directive
2014/53/EU
. The full text of the EU declaration of conformity is available at the following internet
https://www.magtek.com/Content/DocumentationFiles/D998200238.pdf
AUSTRALIA / NEW ZEALAND STATEMENT
Testing for compliance with AS/NZS standards was performed by a registered and accredited laboratory.
The unit under test was found compliant with standards established under AS/NZS CISPR 32 (2013),
AS/NZS 4268 Table 1, Row 59 DTS 2400-2483MHz SRD (802.11), and AS/NZS 4268 (2017) Table 1,
Row 43 13.553-13.567MHz (contactless reader).
UL/CSA
This product is recognized per
UL 60950-1, 2nd Edition, 2011-12-19
(Information Technology
Equipment - Safety - Part 1: General Requirements),
CSA C22.2 No. 60950-1-07, 2nd Edition,
2011-12
(Information Technology Equipment - Safety - Part 1: General Requirements).
ROHS STATEMENT
When ordered as RoHS compliant, this product meets the Electrical and Electronic Equipment (EEE)
Reduction of Hazardous Substances (RoHS) European Directive 2002/95/EC. The marking is clearly
recognizable, either as written words like “Pb-free,” “lead-free,” or as another clear symbol (
).
PCI STATEMENT
PCI Security Standards Council, LLC (“PCI SSC”) has approved this PIN Transaction Security Device to
be in compliance with PCI SSC’s PIN Security Requirements.
When granted, PCI SSC approval is provided by PCI SSC to ensure certain security and operational
characteristics important to the achievement of PCI SSC’s goals, but PCI SSC approval does not under
any circumstances include any endorsement or warranty regarding the functionality, quality or
performance of any particular product or service. PCI SSC does not warrant any products or services
provided by third parties. PCI SSC approval does not under any circumstances include or imply any
product warranties from PCI SSC, including, without limitation, any implied warranties of
merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by PCI
SSC. All rights and remedies regarding products and services which have received PCI SSC approval
shall be provided by the party providing such products or services, and not by PCI SSC.
