background image

 

 iv 

FCC WARNING STATEMENT 

This equipment has been tested and was found to comply with the limits for a Class B digital device pursuant to 
Part 15 of FCC Rules.  These limits are designed to provide reasonable protection against harmful interference 
when the equipment is operated in a residential environment.  This equipment generates, uses, and can radiate 
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference with radio communications.  However, there is no guarantee that interference will not occur 
in a particular installation. 

FCC COMPLIANCE STATEMENT 

This device complies with Part 15 of the FCC Rules.  Operation of this device is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation. 

CANADIAN DOC STATEMENT 

This digital apparatus does not exceed the Class B limits for radio noise from digital apparatus set out in the 
Radio Interference Regulations of the Canadian Department of Communications. 
 
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux 
appareils numériques de la classe B prescrites dans le Réglement sur le brouillage radioélectrique édicté par le 
ministère des Communications du Canada. 
 
This Class B digital apparatus complies with Canadian ICES-003. 
 
Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada. 

CE STANDARDS 

Testing for compliance with CE requirements was performed by an independent laboratory.  The unit under test 
was found compliant with standards established for Class B devices. 

UL/CSA 

This product is recognized per Underwriter Laboratories and Canadian Underwriter Laboratories 1950. 

RoHS STATEMENT 

When ordered as RoHS compliant, this product meets the Electrical and Electronic Equipment (EEE) Reduction 
of Hazardous Substances (RoHS) European Directive 2002/95/EC.  The marking is clearly recognizable, either as 
written words like “Pb-free”, “lead-free”, or as another clear symbol (     ). 

 

 

 

Содержание D99875494-51



















Отзывы: