Magnus Theia fi, Инструкция по эксплуатации

Страница: 4 / 36

Warning Label
A warning indication label is attached to every part which should be handled or oper-
ated with special care. Be sure to observe the indications.
Warning indication position Inside of the base (Warning against high temperature)
If the warning label is stained or peeled off, please contact your local Magnus repre-
sentative for replacement or other inquiry.
Safety Symbols
The following symbols are found on the microscope. Study the meaning of the symbols, and
always use the equipment in the safest possible manner.
O
Indicates that the surface becomes hot, and should not be
touched with bare hands.
Before use, carefully read the instruction manual. Improper
use could result in personal injury to the user and/or damage to
the equipment.
Indicates that the main Electrical Hazard.
Indicates that the main switch is ON.
!
Indicates that the Fuse of 250V/2A , rear of the microscope
FUSE