Assembly
17
• Brake Levers: 5-8 Nm
• Shifter: 2.5 -4 Nm
• Throttle: 2.5 - 4 Nm
• Fender mounts: 4 - 6 Nm
• Battery seat: 2.5 - 5 Nm
• Kickstand: 16 - 20 Nm
• Bottom bracket: 35 - 54 Nm
• Controller mount screw: 2.5 - 4 Nm
• Crankset: 35 - 49 Nm
• Rear wheel axle: 40 - 59 Nm
• Stem face plate: 5 - 7 Nm
• Display mount: 1 Nm
• Throttle clamp bolt: 2.5 - 5 Nm
• Display mount: 1 Nm
• Front and rear brake calipers: 6 - 8 Nm
• Rear derailleur cable clamp bolt: 5 - 8 Nm
Assembly
18
4.3 Battery Installation
Battery Removal
Insert the key provided with the Peak T5/T7 into the lock core. The lock core will be located above the battery
on the non-drivetrain side. After insertion, turn the key to the unlock position to disengage the locking mecha-
nism. While holding the key in the unlock position, grab the top of the battery and push the battery toward the
non-drivetrain side to remove the battery.
Your Magnum Peak T5/T7 battery may be charged whether it is or is not attached to the e-bike.
Charging the Battery
Battery Installation
Insert the key into the lock core. Place the bottom of the battery into the bottom battery seat. Turn the key
to the unlock position, slide the top of the battery into the top battery seat, return the key to the lock position
and remove the key from the lock core.
• Locate the charge port/charge port cover. The charge port is on the bottom left of the battery
• Pull the rubber charge port cover to the side.
• Plug the approved charger into a power source.
• Using the charger that was provided with the Peak T5/T7 align the pins in the battery/charger connector with the
battery’s charge port. Do not force the charger pins into the charge port. The pins should smoothly slide into the port.
• The indicator light on the charger will light up red when the battery is charging.
• The battery has reached full charge when the charger’s indicator light turns to green.
• Disconnect the battery from the charger when the battery has reached a full charge.
• Unplug the charger from the power source when the charge is no longer in use.