Overview
15
Error Code Table
Each error code corresponds to a specific fault in the system. The table below is intended for the e-bike own-
er to use as reference when working with Magnum Bikes technical support or a certified Magnum dealer.
If you still have questions about the display, please contact your Magnum dealer.
Error Code
Definition
Suggestion
“0x20” shown at speed
Failure of controller
Check controller
“0x22” shown at speed
Failure of throttle
Check throttle
“0x23” shown at speed
Failure of motor’s phase wire
Check motor
“0x24” shown at speed
Failure of the motor’s hall
Check controller
“0x30” shown at speed
Communication failure
Check connector to controller
Data Clearance
After 10 seconds of turning on the display, when the display shows the TRIP interface, long press the M
button to show TRIP data. While the TRIP icon is blinking short press the M button to confirm data clearance.
To exit long press the M button. After clearance the subtotal mileage TRIP is 0, average speed is 0, and max
speed is 0. ODO information can not be cleared on the display.
Assembly
16
4. Assembly
4.1 Out of the Box Assembly
Scan QR code for assembly video
4.2 Torque Settings
The following sections are instructions for how to assemble your Premium III e-bike straight out of the box. The
following steps are guidelines on the necessary steps, but they are not a comprehensive guide to all aspects of
assembly. We recommend that you consult a reputable, certified bike mechanic to assist with assembly or to
review assembly.
Because manufacturers use a wide variety of fastener sizes and shapes made in a variety of materials, often dif-
fering by model and component, the correct tightening force or torque cannot be generalized. To make sure that
the many fasteners on your bicycle are correctly tightened, refer to the torque specifications in the section.
Correctly tightening a fastener requires a calibrated torque wrench. A professional bicycle mechanic with a torque
wrench should torque the fasteners on your bicycle. If you choose to work on your own bicycle, you must use a
torque wrench and the correct tightening torque specifications provided in this section. If you need to make an
adjustment at home or in the field, we urge you to exercise care, and to have the fasteners you worked on checked
by your dealer as soon as possible.
Correct tightening force on fasteners - nuts, bolts, screws - on your bicycle is important. Too little force,
and the fastener may not hold securely. Too much force and the fastener can strip threads, stretch,
deform or break. Incorrect tightening force can result in component failure, which can result in the
operator’s serious injury.
Unpacking the bike
1. Open the box. Remove the staples from the flaps to prevent injuring yourself. With the help of another person,
carefully remove the Peak T5/T7 from the box. Carefully remove the packaging material from the e-bike. In the
event that the bike needs to be returned, keep the packaging materials in case you want to ship the bike. Remove
the small cardboard box from the bike box and set it aside. The small cardboard box will contain the battery
charger and a pair of pedals.
2. In addition to the Premium III, ensure that the following pieces are included:
a.
Battery charger
b. Pedals
c.
Battery keys
d.
Seatpost with attached saddle
3. If anything is missing, contact Magnum Bikes: 323-375-2666 or [email protected]
