
REAR PANEL
(see page 2)
A. DC-Power input
Connector to plug in the 13.8VDC power lead.
B. Antenna Connector
Connector SO-239 to plug in the antenna cable using a PL-259 connector.
C. External S-Meter input
Connector to plug in an external S-meter using a 2.5mm plug.
D. External Speaker input
Connector to plug in an external speaker (8 Ohm) using a 3.5mm plug.
TROUBLE SHOOTING
Contact your local dealer if you can not solve the problem or the problem is not listed.
1. Radio will not turn on, display does not light up.
Check the power leads, voltage and fuse.
2. Radio will not transmit (TX) or quality is poor.
Check the antenna, antenna leads, connectors and VSWR.
Check supply voltage.
Check
microphone
3. Radio will not transmit (RX) or reception is poor.
Check the antenna, antenna leads, connectors and VSWR.
Check the adjustment of squelch and volume.
Check the microphone’s condition and is it properly plugged in?
Are you using same channel and same modulation as the counter station.
10