Magnum MS8268, Инструкция оператора

Страница: 6 / 18

2.2 LCD Display Table 1. Display Symbols (continued)
See Table
1
indicated for information about the
Symbo Meaning
LCD display.
RELA
Indicator for the Relative measurement.
IAUTO!
*
((10 CJ
I
REL..t,J hFE
E:±1
.......
Indicator for the Diode Test mode.
hFE Indicator for the transistor test mode.
: 11111�, 1�,
01)) Indicator for the Continuity Check mode.
Cl
Indicator for the Data Hold mode.
A9
0.0.0.0
:�:;
v,mv
V: Volts. The unit of voltage.
mV: Millivolt. 1 x10-
3
or 0.001 volts.
A,mA, A
Amperes (amps). The unit of current.
1-1A
mA Milliamp. 1x10- 3 or 0.001 amperes.
Table 1. Display Symbols
1-1A Microamp. 1x10-
6
or 0.000001 amperes.
Symbol
Meaning
n Ohm. The unit of resistance.
The battery is low.
n, Kn,
Kn Kilohm. 1x10 3 or 1000 ohms.
&
Warning: To avoid false readings,
MO
Mn Megohm. 1x10
6
or 1,000,000 ohms.
�
which could lead to possible electric shock
Hz: Hertz. The unit of frequency in cycles
or personal injury, replace the battery as
Hz,KHz /second.
soon as the battery indicator appears.
MHz KHz: Kilohertz. 1x10 3 or 1000 hertz.
-
Indicates negative readings.
MHz: Megahertz. 1x10 6
or 1,000,000 hertz.
Indicator for ac voltage or current.
F: Farad. The unit of capacitance.
AC voltage and current are displayed as
F,1,1F Microfarad.1 x10·5 or 0.000001 farads.
� the average of the absolute value of the
nF µF: Nanofarad. 1x10·
9
or 0.000000001
input, calibrated to indicate the equivalent
nF: farads.
rms value of a sine wave.
% % Percent. The unit of Duty cycle.
�-�
Indicator for de voltage or current.
n,
The input is too large for the selected
The Meter is in the Autorange mode in
UL
range.
AUTO which the meter automatically selects the
range with the best resolution.
-
07
OB