Magnum MMG 230, Руководство по эксплуатации

Страница: 26 / 48

26
MAGNUM DIGITAL CONTROLLER (MDC) – HISTORY
The Magnum Digital Controller (MDC) controller stores a record of each important event into the history file of
the controller. The history file seats 118 records. When the history file is full, the oldest records are removed.
No.
Record Structure
Abbreviation Historical value
1 AIM1 IG-IOM, IGS-PTM Analog input 1 value (when configured IG-IOM, IGS-PTM)
2 AIM2 IG-IOM, IGS-PTM Analog input 2 value (when configured IG-IOM, IGS-PTM)
3 AIM3 IG-IOM, IGS-PTM Analog input 3 value (when configured IG-IOM, IGS-PTM)
4 AIM4 IG-IOM, IGS-PTM Analog input 4 value (when configured IG-IOM, IGS-PTM)
5 BIM IG-IOM, IGS-PTM Binary inputs (when configured IG-IOM, IGS-PTM)
6 BIN Binary inputs IL-NT
7 BOM IG-IOM, IGS-PTM Binary outputs (when configured IG-IOM, IGS-PTM)
8 BOUT Binary inputs IL-NT
9 Date Date of historical event in format DD/MM/YY
10 EngT IL-NT Analog input 2 value (default Water temperature)
11 FC ECU alarm FailureCode
12 FLvl IL-NT Analog input 3 value (default Fuel level)
13 FMI ECUalarm Failure Mode Identifier
14 Gfrg Generator frequency
15 Ig1 Generator current L1
16 Ig2 Generator current L2
17 Ig3 Generator current L3
18 LChr Character of the load
19 Num Number of historical event
20 OilP IL-NT Analog input 1 value (default Oil pressure)
21 PF Generator PF
22 Pwr Generator active power
23 Reason Event specification
24 RPM Engine Speed
25 Time Time of historical event in format HH:MM:SS
26 Ubat Battery voltage
27 Vg1 Generator voltage L1
28 Vg2 Generator voltage L2
29 Vg3 Generator voltage L3
ADJUSTING THE DISPLAY BACK LIGHTING
The backlighting on the Liquid Crystal Display (LCD) window may be adjusted brighter or darker by the operator
whenever the Magnum Digital Controller (MDC) is powered up.
1. Press and hold “Enter” and press “
S
” or “
T
” on the Diagnostics keypad to increase or decrease the
display contrast as needed.
2. Release the “Enter” button and the “
S
” or “
T
”buttons when the desired backlighting is attained.
Note: Anytime an “*” is displayed on the LCD, the text or set point cannot be changed with out the use of a
password. Contact Magnum Products Technical Support for assistance.