Magnum MDP300, Инструкция по эксплуатации и каталог запасных частей

Страница: 6 / 16

6
UNIT SERIAL NUMBER LOCATION
Refer to the location illustrated below to find the unit ID tag. Important information, such as the unit serial and model
numbers are found on this tag. Record the information from this tag, so it is available if the tag is lost or damaged.
When ordering parts or requesting technical service information, you may be asked to specify this information.
SAFETY SYMBOL SUMMARY
This equipment has been supplied with numerous safety and operating decals. These decals provide important
operating instructions and warn of dangers and hazards. Replace any missing or hard-to-read decals and use care
when washing or cleaning the unit. Decal placement and part numbers can be found on page 14 of this manual.
Below is a summary of the intended meanings for the symbols used on the decals.
215 Power Drive • Berlin, WI 54923
1-800-926-9768
MODEL
SERIAL NUMBER
MDP 300
000000
kg lbs.
WEIGHT
FLOW
Lpm gpm
CONNECTION SIZE
cm in.
TOTAL HEAD
m ft.
DO NOT RUN PUMP DRY!
Unit ID Tag
Read and understand the
supplied operator’s manual
before operating unit.
Hot surface(s) nearby.
Fire/explosion hazard; Keep
open flames away from unit.
Use unleaded gasoline only.
Asphyxiation hazard; Operate
in well ventilated area.
Two-person lift only.
Safety alert symbol; Used to
alert you to potential personal
injury hazards.
Stop engine before fueling.
G
Impeller hazard.