background image

10

MAINTENANCE SCHEDULE

The following maintenance schedule should be followed to ensure proper performance of the unit.

DAILY MAINTENANCE CHECKS AND TIPS

Check the engine oil level daily before starting engine.

DO NOT 

start the pump if the oil level is low! The normal operating level for the engine oil is when oil is 

present on the crosshatch pattern of the dipstick. Add oil to the engine if it does not start or if oil is not present 
on the dipstick when tested.

DO NOT

 overfill the crankcase. 

Consult the engine operator’s manual for the proper grade of oil, including special operating conditions such 
as a change in season or climate.

* After initial break-in, change the engine oil and filter.  Oil change interval can then be extended to 100 hours.

Check engine oil level

Change engine oil

*

Check air filter

Clean air filter

Replace air filter

Check and adjust spark plug

Replace spark plug

Clean muffler/spark arrester

Check and adjust idle speed

Check and adjust valve clearance

Clean combustion chamber

Clean fuel tank and filter

Check fuel tube

Visual walk around inspection

Every 500 hours

Every 2 years

Every 1 year

ITEM

DAILY

20

HRS.

50

HRS.

100

HRS.

500

HRS.

Check external hardware

Inspect hoses and housing for leaks

Clean cooling system

Check and adjust impeller clearance

Содержание MDP300

















Отзывы: