- 22 -
22
IMAGE/FUNCTIONS OF RF-20 REMOTE
To use the remote control for your MD
801 you must first turn the unit ON
with the main power switch on the
front of the unit. Next put the remote
into its proper mode to communicate
with the Internet MediaTuner. Push
the button next to model MD 801 .
Your remote is now in the proper
operating mode.
1.
ON BUTTON- Turns the touch
screen on
2.
OFF BUTTON-Turns the touch
screen off , when not using the unit
turn off the main power with the
power switch on the front off the
unit.
GUIDE –allows access to all modes
3.
INFO – Display’s additional
information about the station and
song
4.
DIRECTIONAL PAD – Use this to
navigate through the menu’s of your
MD 801 Tuner
(up/down/forward/back)
5.
STORING PRESETS.
FM /DAB
Tune to the station: for preset
positions from 1-5 push on the
number you wish to store the
station at , the unit will tell you that
the station has been stored
For positions from 6-10 you must
push the large right arrow button
under the directional pad and the
corresponding number 1-5, 1 being
position 6 and 5 being position 10.
To recall the station just push the
number 1-5 or the large right
arrow button and the number 1-5
6.
navigating in each mode:
Once you have chosen the mode
the directional pad and the select
button will give you access to all the
functions.
