Magnum CSW1012 Скачать руководство пользователя страница 2

Страница: 2 / 30

2015 Sensata Technologies

Thank you from all of us at Sensata Technologies for purchasing this CSW

Series inverter. The CSW Series includes the CSW412, CSW1012 and

CSW2012 inverters; all under the Magnum-Dimensions brand from Sensata

Technologies. We understand that you have many purchasing options in the

marketplace and are pleased that you have decided on this product.
At Sensata, we are committed to providing you with quality products and

services, and hope that your experience with us is pleasant and professional.

Disclaimer of Liability

Since the use of this manual and the conditions or methods of installation,

operation, use and maintenance of the CSW Series inverter is beyond the

control of Sensata Technologies, this company does not assume responsibility

and expressly disclaims liability for loss, damage or expense, whether direct,

indirect, consequential or incidental, arising out of or in any way connected

with such installation, operation, use, or maintenance.
Note as well that while every precaution has been taken to ensure the

accuracy of the contents of this manual, the speci

cations and product

functionality may change without notice. Sensata assumes no responsibility

for errors or omissions.

Restrictions on Use

The CSW Series inverter may only be used in life-support devices or systems

with the express written approval of Sensata Technologies. Failure of the

CSW Series inverter can reasonably be expected to cause the failure of that

life-support device or system, or to affect the safety or effectiveness of that

device or system. If the CSW Series inverter fails, it is reasonable to assume

that the health of the user or other persons may be endangered.

Copyright Notice

copy, distribute, and/or modify this document is prohibited without express

written permission from Sensata.

Document Information

Description – CSW Series Owner’s Manual

Part Number and Revision – 64-0063 Rev C

Date Published – July 2015
This manual is printed without color for cost savings. However, this entire

manual is available with many of the

gures in color and can be downloaded at

www.magnum-dimensions.com.

Contact Information

For Magnum-Dimensions products:

Sensata Technologies

Phone: 425-353-8833

2211 West Casino Rd.

Fax: 425-353-8390

Everett, WA 98204

Web:

www.magnum-dimensions.com

Record the unit’s model and serial number in case you need to provide

this information in the future. It is much easier to record this information

now, instead of trying to gather it after the unit has been installed.

Model:

Serial Number:

CSW412

CSW1012

CSW2012

Содержание CSW1012































Результаты поиска

Содержание CSW1012

Отзывы:

Похожие инструкции для CSW1012

Бренды по названию

Популярные бренды

Magnum CSW1012, Руководство пользователя

Результаты поиска

Содержание CSW1012

Отзывы:

Похожие инструкции для CSW1012

Бренды по названию

Популярные бренды