Magnum 24N808 страница 8 Скачать руководство пользователя

Страница: 8 / 88

Component Identification

313034G

Component Identification

Airless spray gun

Dispenses fluid.

Power switch

Turns sprayer ON and OFF.

Pressure control knob

Increases (clockwise) and decreases (counter-clockwise) fluid pressure in
pump, hose, and spray gun.

Setting Indicator

To select function, align symbol on pressure control knob with setting
indicator, page 10.

Pump fluid outlet fitting

Threaded connection for paint hose.

InstaClean

™

fluid filter

(ProLTS Sprayers only)

•

Filters fluid coming out of pump to reduce tip plugging and improve
finish.

•

Self cleans only during pressure relief.

Power-Piston

™

Pump (behind

Easy Access door, not shown)
(ProLTS Sprayers only)

Pumps and pressurizes fluid and delivers it to paint hose.

Easy Access door
(ProLTS Sprayers only)

Easy Access door permits quick access to outlet valve. To remove door, insert
flat blade of screwdriver into slot on the bottom of the door (as shown on page,
7).

Suction tube

Draws fluid from paint pail into pump.

Prime tube (with diffuser)

Drains fluid in system during priming and pressure relief.

Prime/Spray valve

•

In PRIME position (pointing down) directs fluid to prime tube.

•

In SPRAY position (pointing forward) directs pressurized fluid to paint
hose.

•

Automatically relieves system pressure in overpressure situations.

Inlet screen

Prevents debris from entering pump.

Paint hose

Transports high-pressure fluid from pump to spray gun.

Tip guard

Reduces risk of fluid injection injury.

Reversible spray tip

•

Atomizes fluid being sprayed, forms spray pattern and controls fluid flow
according to hole size.

•

Reverse unclogs plugged tips without disassembly.

Gun trigger safety lever (page
10)

Prevents accidental triggering of spray gun.

Gun fluid inlet fitting

Threaded connection for paint hose.

Power Flush attachment

Connects garden hose to suction tube for power flushing water-base
fluids.

Gun fluid filter

Filters fluid entering spray gun to reduce tip clogs.

Hose wrap Rack

Stows paint hose. (LTS 17, ProLTS 17, and ProLTS 19 only)

Pail hanger (LTS 17, ProLTS
17, and ProLTS 19 only)

For transporting pail by its handle.

Содержание 24N808

























































































Результаты поиска

Содержание 24N808

Отзывы:

Похожие инструкции для 24N808

Бренды по названию

Популярные бренды

Magnum 24N808, Операция

Результаты поиска

Содержание 24N808

Отзывы:

Похожие инструкции для 24N808

Бренды по названию

Популярные бренды