Trouble
Trouble
Trouble
Trouble Shooting
Shooting
Shooting
Shooting
TROUBLE
TROUBLE
TROUBLE
TROUBLE SHOOTING
SHOOTING
SHOOTING
SHOOTING GUIDE
GUIDE
GUIDE
GUIDE::::
SYMPTOM
CAUSE
SOLUTION
Show E0
Not equip Safety key
Please equip the Safety key
Show E1
Speed feedback equipment err
1.Please check Speed feedback equipment
and 10-pin cable or contact special service
2.caused by overload of the user weight,3
lights display at the same time on the
controller.
Please
switch
off
the
power,and restart in 30 seconds.
Show E2
Motor or Motor drive err
Please check PIN cable or contact special
service
Show E3
The error of Speed over limit
Adjust
Speed
feedback
equipment
or
contact special service
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING YOUR
YOUR
YOUR
YOUR TREADMILL
TREADMILL
TREADMILL
TREADMILL::::
This treadmill is designed to be reliable and easy to use. However, if you experience
a problem, please reference the trouble shooting guide listed below:
PROBLEM: The console does not light up.
SOLUTION: Verify that the power cord is plugged in properly to the outlet, and the
treadmill switch is turned on.
PROBLEM: The treadmill circuit breaker trips during a workout.
SOLUTION: Verify that the treadmill is plugged into a dedicated 20amp circuit.
*Note: No extension cord.
PROBLEM: The treadmill shuts off when elevating.
SOLUTION: Verify that there is enough slack in the power cord to reach to the wall
outlet during elevation.
PROBLEM: The running belt does not stay centre during a workout.
SOLUTION: Verify that the treadmill is on a level surface. Verify that the belt is
properly tightened. (Refer to belt adjustment)
PROBLEM: The treadmill makes a clicking noise towards the front of the machine
while walking or running on it.
SOLUTION: For optimum use, the treadmill needs to be level.
18
18
18
18
