Magnum Energy MM-R, Инструкция

Страница: 2 / 8

MM-R/MM-RC Remotes Instruction Sheet
2 © 2017 Sensata Technologies
BULK
ABSO RB
FLOAT
INVERT
AC IN
FAULT
ON/OFF
Figure 2, MM-R/MM-RC Remote Dimensions
Remote and Bezel Dimensions
Use Figure 2 below in preparation for mounting the remote and the supplied
bezel (if applicable). Note: Dimensions listed are approximates.
3” (7.6 cm)
2¼” (5.6 cm)
2
⅛
” (5.4 cm)
2” (5.1 cm)
1” (2.5 cm)
2 ⅝ ” (6.7 cm)
1¼”
(3.1 cm)
1 ⅛ ” (2.7 cm)
1¾” (4.4 cm)
⅛ ”
(.32 cm)
.0625”
(.16 cm)
⅛ ” (.32 cm)
¼” (.63 cm)
Tools Required
Installing the remote control is simple and requires the following tools:
• Phillips screwdriver • Level • Drill
• Cut-out tool (knife/saw) • Pencil • Drill bit (7/64”)
Locating the Remote
Find a location to mount the MM-R/MM-RC remote that is clean, dry, and
protected. Allow ample room to access the remote’s ON/OFF switch and to
view the LEDs—which help to determine operational status and assist with
troubleshooting. The MM-R/MM-RC remote control can either be fl ush mounted
(through an opening in the wall), or surface mounted.