background image

2

Magnum Energy Solutions, LLC         43 Village Way Suite 209          Hudson, OH 44236          phone 330.656.9365          fax 330.656.9368          www.magnumenergysolutions.com          [email protected]

Product Installation Guide

11] Sensor Placement

12] Sensor Placement Test Mode

13] Troubleshooting 

14] Warranty

Classroom

Hotel Room

Sensor Placement Tips:

1) 

Do not mount sensor near obstacles that could potentially block sensor’s line of sight.

2)  

Keep sensors 10-15ft away from heating vents and radiators. If a sensor detects a rapid change in heat, it could  

 

inaccurately detect occupancy.

3) 

If mounting on a wall or in a corner (anywhere other than ceiling) aim sensor towards the likely entry point. 

4) 

If sensor is to be used to control lights based on occupancy and perform daylighting controls, and there  

 

is a question related to appropriate placement, please refer to the guidance herein or call tech support at  

 330.656.9365.

NOTE: remember this device is charged and operates using the light in the room, if there are several mounting 
location choices, choose the brightest option.

1) 

Verify the LED flashes when the LRN button is pressed and released

2) 

If the LED light does not blink, check to see if the device is equipped with a back up battery

3) 

If the device has no back up battery, place the sensor under light, allowing it to charge

4) 

If the LED still does not flash after the LRN button is pressed and released, the sensor could be defective. 

5) 

If the device includes a back up battery, then the battery might need to be replaced. 

U.S. Two-year Limited Warranty: 

Products purchased in the U.S.A. are warranted for two years from date of purchase 

by Magnum Energy Solutions, LLC (M.E.S.) to be free of defects in materials and workmanship. In the event of 
such defect, product will be repaired promptly without charge or, at our option, replaced with a new product of 
equal or superior value if delivered to M.E.S. or an Authorized Service Center, prepaid, together with the sales slip 
or other proof of purchase date. This warranty excludes defects due to normal wear, abuse, shipping damage, or 
failure to use product in accordance with instructions. This warranty is void in the event of unauthorized repair or 
modification, or removal or defacing of the product labeling. The MES warranty specified herein covers material 
only and does not include labor or incidental costs associated with product replacement or repair.

It is recommended that the installer perform a walk test mode in order to properly position the sensor in the most 
ideal location to effectively detect occupancy. It is recommended that the sensor be placed in a well lit area to 
charge before test mode begins.

1) 

Press and hold the LRN (learn) button for 3 (three) seconds 

2)  

The LED light blinks “red” one time

3) 

You are now in “walk” test mode, lasting for a period of 5 (five) minutes

4) 

During activated walk test mode, the LED light will flash 3 (three) times when motion is detected

5) 

There is a 2 (two) second delay between detections

6) 

The red LED light will flash solid for 1 (one) second when time expires

10] Coverage

9] Mounting

Image 1

Image 2

Image 3

Image 4

Ceiling Mount (With Screws):

1) 

Mount backplate to ceiling with the four provided screws (see Image 1)

2)  

Attach the body of the sensor to the backplate by rotating until locked into place (see Images 2-4)

Ceiling Mount (With Tape:

1) 

Peel layer off double stick tape and place one side onto back of sensor housing.

2)  

When ready to place, peel other layer off tape and firmly push motion sensor onto surface and hold for 30-60 seconds.

8] Compatible Devices

• M9-TS1 (24V Intelligent Thermostat with 4.3” LCD) 

• M9-PFC-EO2036 (Line-Voltage Thermostat)

• M9-PFC-EO2037 (24V Thermostat) 

 

• M9-USR-L1 (Single Channel Lighting Control Module)

• M9-UTR-L1 (Two Channel Lighting Control Module) 

• M9-eBox (BACnet IP Gateway)

• M9-AP2 (Access Point) 

 

 

• M9-ILS2 (Integrated Light Switch)

Side View 1

Top View

Side View 2

Long Distance Detection Type

102°

92°

12m

39 ft

33.1m

108 ft

27.8m

91 ft

11.6m

38 ft

13.8m

45 ft

X - Y Cross Section at 16 ft 

Mounting Height

X

Y

12m

39 ft

12m

39 ft

5m

16 ft

5m

16 ft

Y

X

(54°)

(51.3°)

(51.3°)

(54°)

12m

39 ft

12m

39 ft

5m

16 ft

5m

16 ft

Y

X

46.3°

(49.5°)

46.3°

(49.5°)

Отзывы: