9
Pairing is always required during
Note:
“Learn”
switch on receiver (STEP 4)
STEP 6
Controlling the Fan
2.
One remote control can control up to 8 fans (with
in
a 7m (23”) radiu
s
).On ALL receivers verify that the
“Learn” switch is in the
“O”
indicated by one ‘beep’. Within 60 seconds, press and hold
the
LEARN
Speed Up/Down - 1-6 Speed
Use forward mode (clockwise) for cooling.
warm air.
. (
LIGHT SWITCH
!
1
4
5
3
2
Pairing
per Remote Control.
O LIGHT DIMMING
‘LEARN ’ BUTTON
LIGHT SWI TCH
| LIGHT ON/OFF
Pairing the Remote Control
NOTE:
1.
On Receiver:
Verify that the
“Learn”
switch is in
the
“O”
LEARN BUTTON
&
4.
Within 60 seconds
on the Remote Control
indicates successful pairing.
5.
On Receiver:
switch the
“Learn”
switch to
“X”
(this will
lock the pairing code with the remote)
6.
Finish
STEP 7, 8 & 9
and press
ON/SPEED
7.
To re-pair, repeat steps 3 to 5
NOTE:
Pairing a
Single Fan
per remote control:
LEARN MODE
The Remote Control and Fan Receiver will memorise the pairing
LIGHT SWITCH
