Magnimage MIG-EC90, Руководство пользователя

Страница: 38 / 53

34
Note：
If you want to use the computer to control this switcher, you need to
install the upper computer software to connect to this processor through
the network cable. You can modify the IP address and gateway of the
upper computer or this device, so that the two devices are in the same
network segment, and the connection can be successful.
Communication
setting
Make the computer to use the upper computer to connect to
this switcher through the network by modifying the IP address
of this processor.
IP
Settings
IP address
Display or modify the IP address of this machine, you can select
the number to edit through the knob or OK key, or click the
edit key on the right side to enter the number .
Gateway
Display or modify gateway of this machine, you can select the
number to edit through the knob or OK key, or click the edit
key on the right side to enter the number .
MAC Displays the physical address of this machine
Reset Reset the IP address and gateway of this machine
Apply Apply the modified IP address and gateway
Protocol Info Displays communication protocol information in this machine